The IP address 10.0.0.1 is commonly used to access the admin panel of a router. However, it is often mistyped as 10.0.0.0.1, which leads to an invalid webpage.
Belonging to the private IP address class, 10.0.0.1 is typically set by the router manufacturer. To change router settings, such as the WiFi password or SSID, you will need to log into the admin panel.
How to Login to 10.0.0.1?
Accessing the router’s settings is a straightforward process. To log in to 10.0.0.1, follow these steps:
- Open your preferred web browser.
- In the address bar, type http://10.0.0.1 (Do not use 10.0.0.0.1, as it is not a valid IP address).
- A login page for your router’s admin panel will appear. Enter the default username and password.
Tip: The username and password for logging in are not the same as your WiFi credentials. If you haven’t changed them, the default credentials are typically:
- Username: admin
- Password: password
(If these default credentials don’t work, refer to our list of common router passwords.)

Once logged in with the correct username and password, you’ll have access to the router’s admin panel.
Important: If this is your first time logging into the router settings, it’s highly recommended to change the default password to enhance security. Leaving the default password exposes your network to unauthorized access, potentially compromising sensitive information like passwords and credit card details.
For added security, choose a strong password that includes at least 8 characters, mixing uppercase and lowercase letters, numbers, and special characters (e.g., !, @, #, $, ?).
Troubleshooting Access to 10.0.0.1
If you can’t access 10.0.0.1, the issue might be due to one of the following reasons:
- Incorrect IP Address: Ensure the router’s default gateway is actually 10.0.0.1. If it’s a different address, you’ll need to find and use that gateway IP to access the admin panel.
- Mistyped URL: Double-check the address you typed in the browser. Common mistakes include adding www., using https://, mixing up “0” (zero) with “O” (letter), or entering 10.0.0.0.1, which is invalid.
- Network Issues: Restart your router and WiFi network. This is often a quick fix. Wait a few minutes before reconnecting.
- ISP Outage: Ensure you can access other websites to rule out network outages or congestion during peak times.
- Browser Cache/Cookies: Clear your browser’s cache and cookies, which can sometimes cause issues with logging in.
- Router Reset: If nothing else works, reset your router to its factory settings. To reset, unplug the router and hold down the reset button for about 10 seconds. Once the lights on the front of the router blink, it indicates a successful reset.
Note: Resetting the router will erase all customized settings, such as your SSID, password, guest networks, and MAC filtering. It’s a last resort, as it will disrupt any devices connected to the WiFi during the reset process. If you’re using Xfinity Voice, the reset will temporarily disable your ability to make or receive calls, including emergency calls, until the router is back online.

Advanced Router Settings
By default, your router’s security is set to WPA/WPA2, which is currently the most secure option to protect your network. However, you can adjust the settings based on your needs through the Wireless Settings.
Additional features that can be configured include:
- Firewall settings
- Parental controls (to block specific websites)
- IP & MAC binding
- Bandwidth control
- Port forwarding or port triggering (especially useful for gaming)
To maintain security, it’s advisable to enable automatic firmware updates. If that option isn’t available, check the manufacturer’s website for updates every few months and install them manually.